Sunwave Tech. SRC-2200 Manual do Utilizador Página 1

Basic Operations The system function operating area (Scroll key and [Shift keys] ) includes all the general settings. Some functions will need to

Menu Setup In the Main Menu, select REMOTE SETUP with the scroll key to enter Setup mode. There are four options in Setup mode: Learning, Delete, Ma

(3) Macro/Timer: provides continuous functions setting, coupled with timer function, can be set up the delay time between every pre-determined step; b

Setting Up the RF Dongle The RF dongle enables the SRC-2200 to plug and play on your computer for quick setup operation. You only need to plug in the

Code Setup This section explains how to use the SRC-2200’s learning function to learn the infrared codes of another remote control. Read the following

(1) Access the Setup menu and select Learning to begin the learning procedures. (2) Press the scroll key to select the device you want to learn, a

(6) An “X” mark indicates that the learning has failed. Repeat step 5 until you see the “√” symbol. (7) Repeat steps (4) to (7) to continue learning c

Deleting Items <PART I> In the Delete menu you will see that the Device/key and Code are separated in content. The menu item Device/key repr

(2) Select Yes to remove this device, and go back to the Delete menu. Delete a single key (1) Press the scroll key to select the key you wish to del

<PART I-2> Deleting Code Select Delete and then select Code. You may choose to delete all codes for a group of devices, or delete a single code

1Preface About this manual This manual is designed to make using the SRC-2200 Universal Remote Control as easy as possible. Information in this docu

(6) To delete other device codes, repeat steps (1) to (5). (7) Press Back to exit. <PART II> Deleting Macro/Timer Under Delete function, sele

Multifunctional Macro Key Setup This section describes how to set up Macro keys. About Macro Keys The Macro key function enables you to execute a seri

TYPE 1.- Adding a Macro Key Note: Make sure that all related codes of equipment to be used in the Macro have been successfully loaded before Macro set

Step 2: (TV power on) Select Power soft key in TV menu, or the TV Power hard key. Step 3: (TV input) Select Input soft key in TV menu, or the Input h

Step 7: (DVD/VCD OK) Select OK soft key in DVD/VCD menu, or the OK hard key, then select Menu to return to the Main Menu Step 8: Macro setup can

Steps include: 1. Select L. Macro 01 under TV as the designated Learning Macro key. 2. Enter every original remote control code one by one Step 1: Go

transmit IR code to the SRC-2200, until the number on the right side is changed. Refer to the Learning function chart on page14. Step 5: Input all com

Step 1: After saving the settings in a macro, a prompt for timer setting will be displayed. Select Yes to enter, then input the time. Press NEXT to en

Macros and Timers have the following three types of status: • Macro is set, but timer is not. • Macro is set, and timer is activated. • Macro is

General Settings The General Settings menu contains message and function options, including: Date, Time, Beep, Contrast, LCD off, Lit period, Motion,

2Table of Content About the SRC-2200 Universal Remote Control...3 Safety Notices...

(3) Glow: Use the scroll key to adjust the backlight on timeout, from 0 (Off) to 60 sec in one-second intervals. The default value is 8 seconds. Pr

30Specification Model SRC-2200 Battery Four 1.5V AAA Alkaline Batteries Dimensions ( L x W x H ) 210 x 56 x 26 mm Weight (without batteries) 4.8

3About the SRC-2200 Universal Remote Control Designed with built-in pre-programmed codes and Infrared code learning, the SRC-2200 is an epoch-making

4Safety Notices Heed the following safety notices regarding batteries and the device. Battery Usage • Use brand new alkaline batteries. To avoid any

Appearance and Functions n IR/RF - transmits infrared codes or radio signals. oLCD screen - displays soft keys and setup implementation. pSystem

6SRC-2200 device Setup versus RemoteComm Setup Setup Items SRC-2200 RemoteComm Pre-code - √ Learning √ √ Activate device Debug - √ Add key -

Setting up the SRC-2200 This section explains how to set up the SRC-2200, how to install the batteries, and how to configure the remote control codes.

Guide on Major Setup Operations Start Using the SRC-2200 Basic set-up: LCD contrast /time/date Main Manu->REMOTE SETUP->Setting-> Contrast: